//! `TcpStream` split support.
//!
//! A `TcpStream` can be split into a `ReadHalf` and a
//! `WriteHalf` with the `TcpStream::split` method. `ReadHalf`
//! implements `AsyncRead` while `WriteHalf` implements `AsyncWrite`.
//!
//! Compared to the generic split of `AsyncRead + AsyncWrite`, this specialized
//! split has no associated overhead and enforces all invariants at the type
//! level.

use crate::future::poll_fn;
use crate::io::{AsyncRead, AsyncWrite, ReadBuf};
use crate::net::TcpStream;

use std::io;
use std::net::Shutdown;
use std::pin::Pin;
use std::task::{Context, Poll};

/// Borrowed read half of a [`TcpStream`], created by [`split`].
///
/// Reading from a `ReadHalf` is usually done using the convenience methods found on the
/// [`AsyncReadExt`] trait. Examples import this trait through [the prelude].
///
/// [`TcpStream`]: TcpStream
/// [`split`]: TcpStream::split()
/// [`AsyncReadExt`]: trait@crate::io::AsyncReadExt
/// [the prelude]: crate::prelude
#[derive(Debug)]
pub struct ReadHalf<'a>(&'a TcpStream);

/// Borrowed write half of a [`TcpStream`], created by [`split`].
///
/// Note that in the [`AsyncWrite`] implemenation of this type, [`poll_shutdown`] will
/// shut down the TCP stream in the write direction.
///
/// Writing to an `WriteHalf` is usually done using the convenience methods found
/// on the [`AsyncWriteExt`] trait. Examples import this trait through [the prelude].
///
/// [`TcpStream`]: TcpStream
/// [`split`]: TcpStream::split()
/// [`AsyncWrite`]: trait@crate::io::AsyncWrite
/// [`poll_shutdown`]: fn@crate::io::AsyncWrite::poll_shutdown
/// [`AsyncWriteExt`]: trait@crate::io::AsyncWriteExt
/// [the prelude]: crate::prelude
#[derive(Debug)]
pub struct WriteHalf<'a>(&'a TcpStream);

pub(crate) fn split(stream: &mut TcpStream) -> (ReadHalf<'_>, WriteHalf<'_>) {
    (ReadHalf(&*stream), WriteHalf(&*stream))
}

impl ReadHalf<'_> {
    /// Attempt to receive data on the socket, without removing that data from
    /// the queue, registering the current task for wakeup if data is not yet
    /// available.
    ///
    /// See the [`TcpStream::poll_peek`] level documenation for more details.
    ///
    /// # Examples
    ///
    /// ```no_run
    /// use tokio::io;
    /// use tokio::net::TcpStream;
    ///
    /// use futures::future::poll_fn;
    ///
    /// #[tokio::main]
    /// async fn main() -> io::Result<()> {
    ///     let mut stream = TcpStream::connect("127.0.0.1:8000").await?;
    ///     let (mut read_half, _) = stream.split();
    ///     let mut buf = [0; 10];
    ///
    ///     poll_fn(|cx| {
    ///         read_half.poll_peek(cx, &mut buf)
    ///     }).await?;
    ///
    ///     Ok(())
    /// }
    /// ```
    ///
    /// [`TcpStream::poll_peek`]: TcpStream::poll_peek
    pub fn poll_peek(&mut self, cx: &mut Context<'_>, buf: &mut [u8]) -> Poll<io::Result<usize>> {
        self.0.poll_peek(cx, buf)
    }

    /// Receives data on the socket from the remote address to which it is
    /// connected, without removing that data from the queue. On success,
    /// returns the number of bytes peeked.
    ///
    /// See the [`TcpStream::peek`] level documenation for more details.
    ///
    /// [`TcpStream::peek`]: TcpStream::peek
    ///
    /// # Examples
    ///
    /// ```no_run
    /// use tokio::net::TcpStream;
    /// use tokio::prelude::*;
    /// use std::error::Error;
    ///
    /// #[tokio::main]
    /// async fn main() -> Result<(), Box<dyn Error>> {
    ///     // Connect to a peer
    ///     let mut stream = TcpStream::connect("127.0.0.1:8080").await?;
    ///     let (mut read_half, _) = stream.split();
    ///
    ///     let mut b1 = [0; 10];
    ///     let mut b2 = [0; 10];
    ///
    ///     // Peek at the data
    ///     let n = read_half.peek(&mut b1).await?;
    ///
    ///     // Read the data
    ///     assert_eq!(n, read_half.read(&mut b2[..n]).await?);
    ///     assert_eq!(&b1[..n], &b2[..n]);
    ///
    ///     Ok(())
    /// }
    /// ```
    ///
    /// The [`read`] method is defined on the [`AsyncReadExt`] trait.
    ///
    /// [`read`]: fn@crate::io::AsyncReadExt::read
    /// [`AsyncReadExt`]: trait@crate::io::AsyncReadExt
    pub async fn peek(&mut self, buf: &mut [u8]) -> io::Result<usize> {
        poll_fn(|cx| self.poll_peek(cx, buf)).await
    }
}

impl AsyncRead for ReadHalf<'_> {
    fn poll_read(
        self: Pin<&mut Self>,
        cx: &mut Context<'_>,
        buf: &mut ReadBuf<'_>,
    ) -> Poll<io::Result<()>> {
        self.0.poll_read_priv(cx, buf)
    }
}

impl AsyncWrite for WriteHalf<'_> {
    fn poll_write(
        self: Pin<&mut Self>,
        cx: &mut Context<'_>,
        buf: &[u8],
    ) -> Poll<io::Result<usize>> {
        self.0.poll_write_priv(cx, buf)
    }

    fn poll_write_vectored(
        self: Pin<&mut Self>,
        cx: &mut Context<'_>,
        bufs: &[io::IoSlice<'_>],
    ) -> Poll<io::Result<usize>> {
        self.0.poll_write_vectored_priv(cx, bufs)
    }

    fn is_write_vectored(&self) -> bool {
        self.0.is_write_vectored()
    }

    #[inline]
    fn poll_flush(self: Pin<&mut Self>, _: &mut Context<'_>) -> Poll<io::Result<()>> {
        // tcp flush is a no-op
        Poll::Ready(Ok(()))
    }

    // `poll_shutdown` on a write half shutdowns the stream in the "write" direction.
    fn poll_shutdown(self: Pin<&mut Self>, _: &mut Context<'_>) -> Poll<io::Result<()>> {
        self.0.shutdown(Shutdown::Write).into()
    }
}

impl AsRef<TcpStream> for ReadHalf<'_> {
    fn as_ref(&self) -> &TcpStream {
        self.0
    }
}

impl AsRef<TcpStream> for WriteHalf<'_> {
    fn as_ref(&self) -> &TcpStream {
        self.0
    }
}